On March 30 1943, Universitetets Oldsaksamling in Oslo gained the information that a farmer named Lars Gjermundbo found and dug into a huge mound on his land near the farm of Gjermundbu, Buskerud county, southern Norway. The place was examined by archaeologists (Marstrander and Blindheim) the next month and the result was really fascinating.
The mound was 25 meters long, 8 meters broad in the widest place and 1.8 meters high in the middle part. The most of the mound was formed by stony soil; however, the interior of the middle part was paved with large stones. Some stones were found even on the surface of the mound. In the middle part, about one meter below the surface and under the stone layer, the first grave was discovered, so called Grav I. 8 meters from Grav I, in the western part of the mound, the second grave was found, Grav II. Both graves represent cremation burials from the 2nd half of the 10th century and are catalogized under the mark C27317. Both graves were documented by Sigurd Grieg in Gjermundbufunnet : en høvdingegrav fra 900-årene fra Ringerike in 1947.
Grav I consists of dozens of objects connected to personal ownership and various activities, including fighting, archery, horse riding, playing games and cooking. Among others, the most interesting are unique objects, like the chain-mail and the helmet, which became very famous and are mentioned or depicted in every relevant publication.
The helmet is often described as the only complete helmet known from the Viking Age. Unfortunately, it is not true, for at least two reasons. Firstly, the helmet is not by any means complete – it shows heavy damage and consists of only 17 fragments in the current state, which means one-fourth or one-third of the helmet. To be honest, fragments of the helmet are glued onto a plaster matrix (some of them in the wrong position) that has the rough form of the original helmet. Careless members of academia present this version as a reconstruction in the museum and in books, and this trend is then copied by reenactors and the general public. I have to agree with Elisabeth Munksgaard (Munksgaard 1984: 87), who wrote: “The Gjermundbu helmet is neither well preserved nor restored.“
Secondly, there are at least 5 other published fragments of helmets spread across Scandinavia and areas with strong Scandinavian influence (see the article Scandinavian helmets of the 10th century). I am aware of several unpublished depictions and finds, whose reliability can not be proven. Especially, helmet fragments found in Tjele, Denmark, are very close to Gjermundbu helmet, since they consist of a mask and eight narrow metal bands 1 cm wide (see the article The helmet from Tjele). Based on the Gjermundbu helmet, Tjele helmet fragments and Kyiv mask (the shape of the original form of Lokrume fragment is unknown), we can clearly say that spectacle helmet type with decorated mask evolved from Vendel Period helmets and was the most dominant type of Scandinavian helmet until 1000 AD, when conical helmets with nasals became popular.
To be fair, the helmet from Gjermundbu is the only spectacle type helmet of the Viking Age, whose construction is completely known. Let’s have a look at it!
My mate Tomáš Cajthaml made a very nice scheme of the helmet, according to my instructions. The scheme is based on Grieg´s illustration, photos saved in the Unimus catalogue and observations made by researcher Vegard Vike.
The dome of the helmet is formed by four triangular-shaped plates (dark blue). Under the gap between each two plates, there is a narrow flat band, which is riveted to a somewhat curved band located above the gap between each two plates (yellow). In the nape-forehead direction, the flat band is formed by a single piece, that is extended in the middle (on the top of the helmet) and forms the base for the spike (light blue; the method of attaching the spike is not known to me). There are two flat bands in the lateral direction (green). Triangular-shaped plates are riveted to each corner of the extended part of the nape-forehead band. A broad band, with visible profiled line, is riveted to the rim of the dome (red; it is not known how the ends of this piece of metal connected to each other). Two rings were connected to the very rim of the broad band, probably remnants of the aventail. In the front, the decorated mask is riveted onto the broad band.
© 2016 Kulturhistorisk museum, UiO
Since all known dimensions are shown in the scheme, let me add some supplementary facts. Firstly, four somewhat curved bands are shown a bit differently in the scheme – they are more curved in the middle part and tapering near ends. Secondly, the spike is a very important feature and rather a matter of aesthetic than practical usage. Regarding the aventail, rings have the spacing of at least 2 cm. On contrary to chain-mail, rings from the helmet are very thick and probably butted, since no trace of rivets were found. It can not be said whether they represent the aventail, and if so, what it looked like and whether the aventail was hanging on rings or on a wire that was drawn through the rings (see my article about hanging devices of early medieval aventails). Talking about the mask, X-ray showed at least 40 lines, which form eyelashes, similarly to Lokrume helmet mask (see the article The helmet from Lokrume). In spite of modern tendencies, neither traces of metal inlay nor droplets of melted metal were found. The mask shows a two-part construction, overlaped and forge-welded at each temple and in the nose area (according to the X-ray picture taken by Vegard Vike). There is a significant difference between the thickness of plates and bands and the mask; even the mask shows uneven thickness. Initially, the surface of the helmet could be polished, according to Vegard Vike.
I believe these notes will help to the new generation of more accurate reenactors. Not counting rings, the helmet could be formed from 14 pieces and at least 33 rivets. Such a construction is a bit surprising and seems not so solid. In my opinion, this fact will lead to the discussion of reenactors whether the helmet represents a war helmet or rather a ceremonial / symbolical helmet. I personally think there is no need to see those two functions as separated.
I am very indebted to my friends Vegard Vike, who answered all my annoying question, young artist and reenactor Tomáš Cajthaml and Samuel Collin-Latour. I hope you liked reading this article. If you have any question or remark, please contact me or leave a comment below. If you want to learn more and support my work, please, fund my project on Patreon or Paypal.
GRIEG, Sigurd (1947). Gjermundbufunnet : en høvdingegrav fra 900-årene fra Ringerike, Oslo.
HJARDAR, Kim – VIKE, Vegard (2011). Vikinger i krig, Oslo.
MUNKSGAARD, Elisabeth (1984). A Viking Age smith, his tools and his stock-in-trade. In: Offa 41, Neumünster, 85–89.