Petersen type M sword

Many Viking Age sword are richly decorated, which makes quality reconstruction very expensive. That is why I was asked by my colleagues to provide an overview of undecorated swords that would be more affordable to reconstruct. I chose Petersen’s type M for its simplicity and major representation among Scandinavian sword finds. Because this type is often overlooked these days, it certainly deserves our attention.


Description

The type M (also known as R. 489) describes a sword variant standing between types F and Q. It is characterised by a simple hilt in the shape of the letter I. Sharply cut cross-guard and upper guard are usually straight and of similar height. From the front view, both the upper and cross-guard are of rectangle shape, with the cross-guard slightly bent in rare cases. The upper guard is of simple shape similar to cross-guard, and the tang is held in place by hammering it into a rivet shape; the upper guard is never ended by a pommel. Sides of the guards are usually straight, less often rounded. An important feature of type M swords is undecorated hilt. Blades are usually double-edged (single-edged variants make up to 15% of finds according to Petersen) and simple, although we also know of some Norse and Swedish blades made of patern welded steel (Androščuk 2014: 386–7; Petersen 1919: 118). Petersen notes that none of Norse blades carries an inscription, which according to our information is still actual. That said, there is a variant of ULFBERHT inscription on a blade from Eura, Finland (Kazakevičius 1996: 39). While the swords are of simple design, they are made of quality materials.

typM-framdalir
Type M sword from area of Framdalir, Iceland.
Source: Androščuk 2014: 68, Fig. 23.

Type M swords are in general up to one meter long, usually between 80 and 90 cm. The longest sword that we know of is 95 cm long. An average width of Scandinavian blades is 5,5-6 cm, sometimes up to 6,5 cm. Measured swords of average length weigh 1100-1200 grams. The shortest piece we are aware of weighs 409 grams and is 47,7 cm long, with blade having 38,5 cm in length and 0,48 cm in thickness (Peirce 2002: 86). This sword, said to had been found in a boy’s grave, seems to be a miniaturised, yet fully functional version. In order to outline anatomy of this interesting type, we chose six relatively well-preserved swords that we will describe in more detail.

C59045_DovreDovre, Norway (C59045). Well-preserved sword found in a grave in 2013. Total length of 89 cm, blade length is 77 cm and 5,9 cm wide. Fuller is visible 12 cm from cross-guard up to 6 cm from blade point. Length of the hilt is 12 cm, with grip being 9,3 cm long and 3,4 cm wide. Cross-guard’s length, height and width are 9,4 × 1,1 × 2,3 cm. Upper guard has the measurements 7 × 1,3 × 2,2-2,3 cm. Total weight 1141,1 g. Photo source: Vegard Vike, Museum of cultural history, Oslo.

C58919_FlesbergÅsland, Norway (C58919). A preserved sword placed in a grave, found in 2013. Total length 87 cm. Length of grip 8,5 cm. Length, height and thickness of cross-guard is 11,6 × 1,2 × 2,6 cm. Length, height and width of upper guard is 8,1 × 1,2 × 2,7 cm. Photo source: Elin Christine Storbekk, Museum of cultural history, Oslo.

C24244_ArgehovdMogen, Norway (C24244). Well-preserved sword found in a grave before 1937. Total length 85 cm, blade width 5,5 cm. Grip length 9,6 cm. Length of cross-guard 12,9 cm, length of upper guard 8,3 cm. Photo source: Peirce 2002: 86, Museum of cultural history, Oslo.

C53462_TelemarkTelemark, Norway (C53462). Partially corroded sword donated to museum in 2004. Total length 71 cm, damaged blade is 59,5 cm long and 5,8 cm wide. Length of grip 9,7 cm. Length and height of cross-guard is 10,5 × 1 cm, length and width of upper guard 6,8 × 0,8 cm. Photo source: Ellen C. Holte, Museum of cultural history, Oslo.

parisUnknown French location, possibly found in a river (Musée de l’Armée, Paris; J3). Very well-preserved sword found before 1890. Total length 90 cm. Blade is 75 cm long and 5,3 cm wide. Length of cross-guard 10 cm. Length of grip 12 cm. Photo source: Peirce 2002: 86, Musée de l’Armée negativ K23710.

T19391-rorosRøros, Norway (T19391). Well-preserved sword found in 1973. Total length 90 cm, blade is 78 cm long and 5,5 cm wide. Length, height and width of cross-guard 12,2 × 1,3 × 2,3 cm. Measurements of upper guard are 8,1 × 1,3 × 2,1 cm. Photo source: Ole Bjørn Pedersen, Museum of cultural history, Oslo.

We should also pay an attention to organic remnants found on type M swords. In general, we could say that many swords show traces of wooden panelling of the grip and wooden scabbard. Let’s examine several specific examples. The sword find from grave 511 in Repton, England was stored in wooden scabbard, that was inlaid with sheep’s fleece and covered in leather (Biddle – Kjølbye-Biddle 1992: 49). The scabbard was held by a hanging system, of which only a single cast buckle survived. The handle was made of softwood, which was then wrapped with a cloth strip. The sword from Öndverðarnes, Iceland (Kt 47) had a wooden grip wrapped in thin, plaited cord, and a wooden scabbard covered in textile (Eldjárn 2000: 326). Traces of leather cover were found at the tip of the scabbard, with remnants of sword belt slider located 3 cm below the cross-guard. In another Icelandic grave from Sílastaðir (Kt 98) – was found a sword with grip of wooden panels that were retracted below the cross-guard and wrapped with a cord at the upper guard (Eldjárn 2000: 326). This sword’s scabbard is wooden, inlaid with textile and covered in linen and leather; there are still several spots with visible profiled wrappings. There was a metal strip placed 12 cm below cross-guard, most likely used for sword belt attachment. The scabbard had a leather chape at the tip.

Organic components are also often present at type M swords from Norway. One of the Kaupang swords had a wooden grip wrapped with a leather cord or strap, and a wooden scabbard covered in leather (Blindheim – Heyerdahl-Larsen 1995: 61). Fragments of wooden grips and scabbards were simultaneously found with swords from Brekke (B10670), Hogstad (C52343), Kolstad (T12963), Støren (Androščuk 2014: 76, Pl. 111) and Åsland (C58919). The sword from Nedre Øksnavad (S12274) had a wooden grip and scabbard covered in textile. The sword from Eikrem (T12199), which is most likely of type M, had a scabbard made of spruce with parts held together by metal clamps and covered in leather and textile. The sword from Soggebakke (T16395) had a wooden scabbard. Swords from Hallem søndre (T13555), Havstein (T15297) and Holtan (T16280) had fragments of wooden grips. This is only a limited inventory that I was able to list during my short research. Yet it is an immensely valuable source that provides us with a decent idea of what the typical type M sword looked like.


typM-ondverdarnestypM-kaupang

Swords from Öndverðarnes, Iceland and Kaupang, Norway.
Source: Blindheim – Heyerdahl-Larsen 1995: Pl. 48; Eldjárn 2000: 326, 161. mynd.


 

Distribution and dating

When it comes to distribution of the swords, it seems that type M was mainly a Norwegian domain. In 1919, Petersen noted that that there are at least 198 type M swords known in Norway, of which at least 30 were single-edged (Petersen 1919: 117–121). Nonetheless, in the past 100 years, an immeasurable amount of new swords were excavated, and the number increases every year – such as in Vestfold, which is absent in Petersen’s list, we already have 42 finds (Blindheim et al. 1999: 81). Highest concentration of type M swords is in Eastern Norway and Sogn, where we know of at least 375 swords according to Per Hernæs (1985). Mikael Jakobsson (1992: 210) registers 409 swords in Norway. And current number will undoubtedly be even greater. We will most likely not be far from truth while claiming that type M is together with type H/I one of the most widespread Norwegian swords. The number of sword finds in neighbouring areas is disproportionate. From Sweden, we only know of 10 swords (Androščuk 2014: 69), at least 4 from Iceland (Eldjárn 2000: 330), at least 4 from Great Britain (Biddle – Kjølbye-Biddle 1992: 49; Bjørn – Shetelig 1940: 18, 26), 4 from France (Jakobsson 1992: 211), 2 from Denmark (Pedersen 2014: 80), 3 from Finland, 1 from Ireland and 1 from Germany (Jakobsson 1992: 211; Kazakevičius 1996: 39). Vytautas Kazakevičius (1996: 39) registers at least 9 type M swords from Baltic, at least 2 from Poland and 2 from Czech Republic. Jiří Košta, the Czech sword expert, denies there is a single type M sword find from Czech Republic and according to him, claiming so is but a myth often cited in literature (personal discussion with Jiří Košta). Baltic swords are rather specific – they are shorter and with a narrower single-edged blade, features causing them being interpreted as local product. It is safe to say we know of over 440 pieces, though the real count being much higher.

When it comes to dating the finds, Petersen argues that first type M swords appear in Norway around the half of 9th century and prevail until the beginning of 10th century (Petersen 1919: 121). Recent archaeological finds from Eastern Norway, Kaupang especially, show that they were being placed in graves during first half of 10th century (Blindheim et al. 1999: 81). Two Swedish datable pieces come from the 10th century (Androščuk 2014: 69), which is also the case of two swords from Iceland (Eldjárn 2000: 330). Polish finds can be dated to 9th century (Kazakevičius 1996: 39). Type M swords are thus widely present from both geographical and chronological perspective, and one can only argue if the similarity is just a rather randomness caused by simple design.

typM
Type M sword distribution in Eastern Norway and Sogn.
Source: Blindheim et al. 1999: 81, Fig. 9, according to Hernæs 1985.


Intepretation

Generally speaking, a sword is a clear symbol of elite status and power. It is evident that Old Norse people, like people anywhere else, tended to compare to one another, be it in skills or wealth. This often resulted in quite a heated dialogue, in which men attempted to triumph in greatness of their qualities (so called mannjafnaðr). Swords undoubtedly played a role of wealth and status symbols in such situations. Looking from a broader perspective, one can find the answer in Norway that was multipolar in 9th and 10th century – ruling families were attempting centralisation, which resulted in creation of society with a strong feel for expressing its independence or importance through adopting the elitism model of sword ownership and its placing in graves. This led to Norway providing us with immense amount of sword finds, which is unprecedented. Social tensions affected everyone to a point, but only a few had the wealth to invest large in exclusive weaponry. “Simpler”, yet fully functional type M swords can be perceived as cheaper alternative that provided free men of lesser wealth with ability to improve reputation and identity of their families in times with no clear social stratification. This is supported by their look and amount present in both male and female graves (Kjølen, C22541).

„Simple iron parts without any precious metal decoration make up the hilt of the sword. It is a pragmatic sword, probably worn with pride, but not by the highest strata of society. Such simple and unpretentious swords seem to be the norm in mountain graves, and they were probably made or at least hilted in Norway.“ (Vike 2017)

 

Type M swords seem to be utility weapons that could had played a representative role to their owners. Two rare Norse swords – a sword from Strande (T1951) and sword from Lesja (C60900) – suggest that they were handed down for at least 50 years and were modified to match the latest fashion. This approach is also the case of other Viking Age swords (Fedrigo et al. 2017: 425). The swords from Strande has type E pommel, which was additionally attached to tang along with typologically younger cross-guard of type M (Petersen 1919: 78, Fig. 66). The sword from Lesja consists of blade with tang, to which a cross-guard of older sword style (type C) was attached together with type M upper guard (Vike 2017). It is also important to add that the sword from Lesja was found on an iceberg, where it most likely served a reindeer hunter 1000 years ago.

Lesja, Norway (C60900). Very well-preserved sword found in 2017 on an iceberg. Type C cross-guard with type M upper guard. Total length 92,8 cm, length and width of blade 79,4 × 6,2 cm. Thickness of blade 0,45 cm. Length of hilt 13,4 cm, grip is 10,1 cm long. Cross-guard measures 7,5 × 1,7 cm. Total weight 1203 g. Photo source: Vegard Vike, Museum of cultural history, Oslo.


Bibliography

Androščuk, Fedir (2014). Viking Swords : Swords and Social aspects of Weaponry in Viking Age Societies, Stockholm.

Biddle, Martin – Kjølbye-Biddle, Birthe (1992). Repton and the Vikings. In: Antiquity, Vol. 66, 38–51.

Bjørn, Anathon – Shetelig, Haakon (1940). Viking Antiquities in Great Britain and Ireland, Part 4 : Viking Antiquities in England, Bergen.

Blindheim, Charlotte – Heyerdahl-Larsen, Birgit (1995). Kaupang-funnene, Bind II. Gravplassene i Bikjholbergene/Lamøya. Undersøkelsene 1950–1957. Del A. Gravskikk, Oslo.

Blindheim, Ch. – Heyerdahl-Larsen, B. – Ingstad, Anne S. (1999). Kaupang-funnene. Bind II. Gravplassene i Bikjholbergene/Lamøya: Undersøkelsene 1950–57. Del B. Oldsaksformer. Del C. Tekstilene, Oslo.

Fedrigo, Anna et al. (2017). Extraction of archaeological information from metallic artefacts—A neutron diffraction study on Viking swords. In: Journal of Archaeological Science: Reports, 12, 425–436.

Hernæs, Per (1985). De østnorske sverdfunn fra yngre jernalder : en geografisk analyse. Magistergradsavhandling i nordisk arkeologi – Universitetet i Oslo, Oslo.

Jakobsson, Mikael (1992). Krigarideologi och vikingatida svärdstypologi, Stockholm : Stockholms Universitet.

Kazakevičius, Vytautas (1996). IX–XIII a. baltų kalavijai, Vilnius.

Pedersen, Anne (2014). Dead Warriors in Living Memory. A study of weapon and equestrian burials in Viking-age Denmark, AD 800-1000, Publications from the National Museum. Studies in Archaeology & History Vol. 20:1 1. (Text), Copenhagen.

Peirce, I. G. (2002). Catalogue of Examples. In: Oakeshott E. – Peirce, I. G. (eds). Swords of the Viking Age, Woodbridge, 25–144.

Petersen, Jan (1919). De Norske Vikingesverd: En Typologisk-Kronologisk Studie Over Vikingetidens Vaaben. Kristiania.

Vike, Vegard (2017). A Viking sword from Lesja. UiO Museum of Cultural History, Oslo.
https://www.khm.uio.no/english/research/collections/objects/15/sword_lesja.html

The forms of Norwegian sword grips

While self-learning about swords from Early Medieval Norway, I noticed quite a number of specimens having well-preserved organic remnants of hilts and sheaths. Because normally these components do not remain, I considered useful to gather these materials into coherent articles to enrich sword enthusiasts. In this article we will follow up on Norwegian sword hilts from the Viking age, however we think that the Norwegian material can be used for pointing out all the sword hilt types used in Early Medieval Europe.

We start by quick recapitulation of how we define the hilt and handle of these swords. The sword is composed of a blade and hilt components which are mounted on the blade’s tang. The hilt components are the lower guard (fremra hjaltit) and a pommel, which can be one-pieced or two-pieced. In case of the one-pieced pommel, the tang goes through and is riveted at its top. However, in case of the multi-pieced pommel, the tang is usually riveted to the upper guard (efra hjaltit) and then the cap of the pommel is riveted to the upper guard by two rivets. Uncovered part of the tang between the lower guard and the pommel provides the space for a handle (meðalkafli). Now we will explore the ways of covering the tang to enable comfortable and smart use of the sword.

Viking Age sword terminology. Created by Jan Zbránek and Tomáš Vlasatý.

During a fairly thorough exploration of the Unimus catalogue I was able to find four main hilt forms. We can notice that most of the hilts are anatomically shaped, widening towards the lower guard.

Wooden handle
A tang covered with a wooden handle of an oval cross-section – that seems to be the most common variant used in the Viking Age, which also has great variability. The handle could be made of two identical scales, a cylinder with a burnt-in gap or a cylinder with a cutting that would be covered with a narrow piece of wood when mounted on the tang. The material seems to be the wood of broad-leaved trees (i.e. T16054 and T20736, and the pre-Viking B4590 seems to have a birch handle as well). In contrary to Pre-viking periods, the profiling of the handles in terms of finger copying bumps is not documented. Some swords seem to have only an unwrapped wooden handle, in other cases the wooden handles are wrapped in leather, fabric, metal or a combination of these.

  • Leather wrapping
    We have evidence that the wooden base was wrapped with a leather cord (C57001) or a strip of leather (T14613). The shape cannot always be reconstructed exactly, at least in one case the wrapping leather does not have a specified shape (C23127, Ts2954). Identical leather wrapping can be found on Swedish and Icelandic swords.

  • Cloth wrapping
    We can sometimes detect thread (S3821), textile strap (B5161) or cloth plus iron wire wrapping (T3107). Some of the finds are wrapped in unspecified textile (S11782, T12962, T21998). Identical methods of cloth wrapping can be found on Swedish swords as well.

  • Wire wrapping
    Silver, gold or copper alloy wire was a quite popular and very spectacular option for wrapping (C5402, C22138, C23486, C58882, T19225) as manifested on S and Æ types. This variant is also mentioned in written sources (vaf), specifically in the context of elites around the ruler and rich farmers (Falk 1914: 23). As we can see, the wrapping was typically executed with orderly separation of thin wires and two pairs of coiled wires opposite to each other, thus creating the fishbone effect. The wires are often entwined into curls of thicker wire at the ends of the handle. Wooden handles were quite minute under the wire, making the resulting handle rather subtle. This can arise some questions regarding possible special designation of such swords, for example combat swords fit for stabbing (personal debate with Roland Warzecha).

  • Metal ferrules on the handle
    Usage of bronze pre-cast or plated ferrules at the ends of wooden handles was equally popular (B1481, B11477, C1194, C1977, C5464, C8095, C9981, C11301, C16107, C18494, S5371, T8257, T16054, T20913). Pre-cast ferrules are crown-shaped and their tongue-like protrusions often depict animal or humanoid heads. These ferrules are probably mentioned even in written sources under the name véttrim (Androshchuk 2014: 31). Some hilts have simple ferrules spread on the inner surface of the handle (B878, B11477).

rukojetiDiverse variants of Norwegian sword handles.
B8118, C57001, T3107, C58882, T16054.

rukojeti-svedsko
Swedish analogies. Taken from Androshchuk 2014: 104-105.

 

Antler handle
As far as I know, there was only one sword in the Viking age (S2453) with its grip made of antler scales. Handles made of this material are very rare in neighbouring Sweden too, where only two specimens (Androshchuk 2014: Jä 12; Holm 2015) were found. The antler scales of Swedish swords were riveted on the side with tiny iron rivets.

rukojeti-paroh
Antler handles from Norway and Sweden.
S2453 (left), SHM 12426 (right).

Straw / bast wrapping
According to the Unimus catalogue, a single-bladed sword was found at Tussøy (Ts3639) whose handle was wrapped in straw or bast. This modification seems to be completely unique and I know of no parallels to it. Due to insufficient description, we can provide no detailed information. In addition, Sveinulf Hegstad, the photo archivist University of Tromsø, provided me with a current photo of the object and there is no organic trace left.

Metal handle
Pre-cast or forged handles are found on some of Peterson’s type D swords in Norway (i.e. B5774, C4072. C8095, C24887, T14309). These swords, being among the heaviest of all Viking swords, can be dated to 800-950 AD. They are composed of triple-lobed, two-pieced pommel, guard and typically also a metal handle. These handles are massive products of metal casting or smithing and their surface is covered with geometric or animal decor. The lower layers of the profiled decoration are decorated with copper alloy, the upper layers with silver. These handles are also sometimes decorated with ferrules on the handle tops (véttrim). According to Petersen, there were 11 swords of this type in Norway in 1919 (Petersen 1919: 70-75), while Hernæs filed up to 16 specimens by 1985 (Hernæs 1985).

rukojeti-kovoveD type swords with metal handles.
B5774, C4072. C8095, C24887.

Bibliography

Androshchuk, Fedir (2014). Viking Swords : Swords and Social aspects of Weaponry in Viking Age Societies, Stockholm.

Falk, Hjalmar (1914). Altnordische Waffenkunde. NVAOS. No.6., Kristiania.

Hernæs, Per (1985). De østnorske sverdfunn fra yngre jernalder : en geografisk analyse. Magistergradsavhandling i nordisk arkeologi – Universitetet i Oslo, Oslo.

Holm, Olof (2015). A Viking Period sword from Skäckerfjällen with a decorated antler grip. In: Fornvännen 110:4, 289-290.

Petersen, Jan (1919). De Norske Vikingesverd: En Typologisk-Kronologisk Studie Over Vikingetidens Vaaben, Kristiania.